Sreang Nicil Pure 200/Uns Uimh2200 0.25mm
Grád: Ni200, Ni201, N4, N6
Ard-insínteacht
Friotaíocht creimeadh den scoth
neart meicniúil maith
Cur síos ar Alloy
Is é nicile 200/201 an grád is mó a úsáidtear, a shonraítear go ginearálta le haghaidh caipíní trasraitheora, anóidí le haghaidh feadáin leictreonacha, luaidhe comhpháirteanna leictreonacha / Luaidhe-i-Sreanga le haghaidh lampaí agus le haghaidh Sreang-mhogall. Úsáidtear freisin i bhfoirm stiallacha d'iarratais éagsúla lena n-áirítear cadhnraí Ni-Cd.
Coinníoll an tSoláthair
Soláthraítear Nicil 200, 201 agus 205 faoi na coinníollacha seo a leanas:
Fuar Tarraingthe, Teocht Speisialta.
Fuar Tarraingthe, Annealed. Straightened agus Gearr Faid.
Nóta:
NUS N02201 (ASTM B 162) mar an gcéanna le N4 (GB/T 2054).
NUS N02200 (ASTM B 162) mar an gcéanna le N6 (GB/T 2054).
Foirmeacha
Coil - Stráice, Scragall, Ribín
Sreang - Próifíl, Babhta, Maol, Cearnóg
slat, barra, gaibhneachta, pláta, leathán
Comhdhéanamh ceimiceach
Grád | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
N4 | 99.9 | 0. 015 | 0. 03 | 0. 002 | 0. 01 | 0. 01 | 0. 001 | 0. 001 | 0. 04 |
N6 | 99.6 | 0. 10 | 0. 10 | 0. 05 | 0. 10 | 0. 10 | 0. 005 | 0. 002 | 0. 10 |
Níl 201 | 99.0 | ≤0.25 | ≤0.35 | ≤0.35 | ≤0.02 | / | ≤0.01 | / | ≤0.40 |
Níl 200 | 99.0 | 0. 20 | 0. 30 | 0. 30 | 0. 15 | / | 0. 01 | / | 0. 40 |
Cumais Scragall nicile
Grád | Stráice Nicil Pure 99.6% / 99.9% |
Tiús | 0.002 go 2.50 mm |
Lamháltais | +/- 5% (tá lamháltais speisialta ar fáil) |
Leithead | Suas le 350mm ar leithead |
Méid coil | Suas le 80 kg gan welds |
Raonta Teocht | Annealed to Full Hard |
Beachtas Táirge Scragall nicil
Tiús | Tiús liúntas | Búr airde | Raon feidhme leithead agus caoinfhulaingt | |||||
2≤w<10 | 10≤w<50 | 50≤w<100 | 100≤w<150 | 150≤w<200 | 200≤w | |||
0.02≤t<0.05 | ±0.003 | ≤0.005 | ± 0. 05 | ±0.10 | ±0.15 | ±0.20 | ±0.30 | ±0.50 |
0.05≤t<0.1 | ±0.005 | ≤0.01 | ||||||
0.1≤t<0.2 | ±0.008 | ≤0.015 | ||||||
0.2≤t<0.3 | ±0.012 | ≤0.02 | ||||||
0.3≤t<0.4 | ±0.015 | ≤0.03 | ± 0. 10 | ±015 | ±0.25 | ±0.50 | ±0.80 | ±1.00 |
0.4≤t<0.6 | ±0.025 | ≤0.05 | ||||||
0.6≤t<0.8 | ±0.030 | ≤0.06 | ± 0. 30 | ±0.40 | ±0.50 | ±0.50 | ±0.80 | ±1.00 |
0.8≤t<1.0 | ±0.040 | |||||||
1.0≤t<1.2 | ±0.050 | ≤0.08 | ± 0. 50 | ±0.50 | ±0.80 | ±1.00 | ±1.00 | ±1.50 |
1.2≤t<1.4 | ±0.060 | |||||||
1.4≤t<1.7 | ±0.070 | ≤0.10 | ||||||
1.7≤t<2.0 | ±0.080 |